March 31, 2013
by nostromo
0 comments
In my previous post, I’ve explained how to add midi control to the monotron’s pitch, gate and frequency cut-off using a Teensy chip. The good news is that the Teensy’s got plenty of raw power left leaving room for extra … Continue reading
March 21, 2013
by nostromo
1 Comment
This is a description of how you can easily add MIDI to a Korg Monotron using a Teensy 3.0. The objective here is twofold: First to provide an easy way to control the Monotron’s pitch and filter cut-off via MIDI, then … Continue reading
September 20, 2012
by nostromo
4 Comments
In my previous post, I reported my investigation on building a synth on the RPi and although for the price it was amazing, the performance didn’t go near what the priciest Beagleboard could deliver. However today got anounced a ‘Turbo … Continue reading
September 17, 2012
by nostromo
5 Comments
The next logical step after finishing the Raspberry Synth port of last week was to give a serious go at my game console-oriented tracker, LittleGPTracker. Since the code base isn’t that different -it’s a predecessor of the synth architecture but share … Continue reading
September 9, 2012
by nostromo
12 Comments
So, after all the exposure of the create digital music post, it is high time I added a little bit of background to the Raspberry Pi-MS Korg combo. I really should have done that before I leaked the video anywhere but … Continue reading
July 22, 2012
by nostromo
2 Comments
Having spent some time yesterday on tuning my synth filter code for my arduino legovox, I decided to see how the combination of two radically different ATmega based synth (my own squealer and the Shruti-1) would sound: It was time for a … Continue reading
July 9, 2012
by nostromo
1 Comment
The arduino never fails to suprise me. Even for someone like me that has close to zilch knowledge about practical electronics, it is so easy to grasp that the possibilities are mind botteling. In a sense, I kind of find … Continue reading
May 19, 2012
by nostromo
3 Comments
Apparently there was interest in getting a LittleGPTracker version running on unix embedded board other than the game console. Good thing is: It took roughly 20 minutes to do. It’s not wired to midi at all but everything runs flawlessly … Continue reading
April 25, 2012
by nostromo
0 comments
Now just find a SLIP C++ library that I can work beagleboard side.
April 21, 2012
by nostromo
1 Comment
Now that my audio pipe is a lot cleaner, I thought it might be a good time to spend some time looking at latency and performance for the beagleboard. For sequencing internally, latency isn’t too much of an issue but … Continue reading